Thermostat placement mistakes are more common than you might think, and we are here to help you figure out what’s best for your home setup. Your thermostat tells your HVAC system when to turn on and off. Where you place it makes a big difference. Bad thermostat placement can cause your system to run more than it needs to, raising your energy bill.
If you install your thermostat near windows or in direct sunlight, it reads the room as hotter than it really is. That causes your AC to overwork, especially during Phoenix summers.
Placing your thermostat near vents, fans, or drafty doors can trick it into thinking the house is cooler than it is. Then your heater turns on when it doesn’t need to.
Aim to install your thermostat on an interior wall, about five feet from the floor. Keep it away from windows, doors, or anything that affects room temperature. For more guidance, check out this official guide from Energy.gov.
Don’t place your thermostat in the kitchen, bathroom, or hallways. These rooms often have changing temperatures that do not reflect the comfort of your whole home.
Incorrect thermostat placement makes your system run more often. That wastes energy and causes wear on your HVAC unit. The wrong placement can raise your energy bill by up to 10%.
Electronics give off heat. If your thermostat is near TVs, lamps, or computers, it can think the room is warmer than it is. That makes your AC work harder.
Make sure airflow around your thermostat is normal. Don’t block it with furniture or curtains. Free airflow helps the thermostat sense the real room temperature.
Talk to an HVAC technician about your thermostat placement. They can inspect your home and help you find the best spot. Chas Roberts offers expert AC services in Phoenix.
Smart thermostats adjust better to changing conditions, but smart thermostat placement mistakes can still happen, and location still matters. Even with smart models, poor placement can lead to high energy bills.
Try setting your thermostat to 78°F in the summer and 68°F in the winter when you’re home. These energy saving thermostat tips can cut your costs without sacrificing comfort.
Dirty filters and worn-out parts make your system less efficient. Combine good thermostat placement with routine HVAC maintenance to maximize savings.
If your thermostat is older than 10 years or not working well, it may be time to upgrade. A new thermostat, placed correctly, helps control your energy use better.
Use programmable settings for when you’re asleep or away. These energy saving thermostat tips work great in homes where temperatures change a lot throughout the day.
If your bill is unusually high, look at where your thermostat is. Relocating it might solve the issue. Many Phoenix homeowners make this fix and see big improvements.
Even though smart thermostats offer better control, they still rely on sensors in a single location. Poor placement means bad readings—no matter how smart the device is.
Consider zoning if your home has hot and cold spots. Placing a thermostat in each zone ensures more accurate control. Read more on AC zoning systems here.
You don’t need a full HVAC overhaul. Sometimes moving your thermostat a few feet is all it takes to make your system more efficient.
A professional home energy audit includes reviewing your thermostat placement. Schedule one to find out where you can save the most energy and money.
Use these energy saving thermostat tips in combination with proper placement. It’s a small change with big rewards, especially during Arizona’s scorching summers.
Stay updated with our latest home maintenance tips and guides by visiting our blog regularly.
Your home is your haven, and we’re here to help you keep it running smoothly.
Read our customer testimonials and check out our newest deals and coupons to discover why Chas Roberts is the right fit for you!